Trilite
Trilite is a range of translucent fibre glass reinforced polyester rooflighting and glazing sheet, profiled to suit fibre cement, metal roofing and cladding profiles, and is used extensively to allow naturally diffused daylight into a wide range of applications from stadia to DIY projects.
Trilite GRP sheets are supplied as standard with the ‘Superlife’ enhanced UV protective finish to minimise the harmful effects of the suns’ ultra-violet radiation and to ensure a long life span.
Use our Profile Finder Tool to search for a profile.
Key features
- Range of sheet grades to suit specification and budget
- Supplied with 'Superlife' enhanced UV surface protection
- Excellent diffused natural light transmission levels
Applications
- Rooflights and vertical glazing
- Stadia, factories, warehouses
- Agricultural buildings
- Can be specified and installed to be Class B non-fragile to ACR[M]001
- Supplied with 'Superlife' enhanced UV surface protection
- Excellent diffused natural light transmission levels
- BBA Approved A wide range of profiles to match almost all roof cladding systems
- Available in weights of 1.8kg/m², 2.4kg/m², 3.0kg/m², 3.6kg/m² or 4.5kg/m²
- Specification of 'Diamond' surface protection for added resistance to weathering, UV degradation and aggressive environments
| Trilite 18 | A cost-effective 1.8kg/m2 sheet which can achieve Class B non-fragility when used in combination with Trilite 24 and above. |
| Trilite 24 | A standard weight 2.4kg/m2 sheet suitable for projects that will require minimal roof access. It can achieve Class B non-fragility in combination with other GRP rooflight sheets and will also achieve class C non-fragility during construction when used as a liner in a typical liner profile. |
| Trilite 30 | A standard weight, 3.0kg/m2 sheet that in typical applications is resistant to damage during construction and suitable on projects where there is limited or controlled access needed after construction. It will achieve class B non-fragility as a liner during construction or as a single skin rooflight when new. |
| Trilite 36 | A heavyweight, 3.6kg/m2 sheet that also provides significantly greater safety levels than the minimum requirements and suitable for projects that require regular roof access after construction. It can be expected to remain class B non-fragile as a single skin rooflight for at least 25 years. |
| Trilite 45 | A heavyweight, 4.5kg/m² sheet that provides significantly greater safety levels than the minimum requirements and is unaffected by loads typical of inadvertent foot traffic or a falling person when fully fixed. It is ideal when there is a high risk of accidental foot traffic during subsequent roof construction when fully fixed. |
| Trilite 45 Liner | A heavyweight lining panel with a weight of 4.5kg/m2 that provides generous safety margins at the lining out phase, for safer working conditions. It has a life expectancy of over 30 years. |
